347-349 Brisbane St, West Ipswich
Mon-Fri: 7.30am-5:00pm Sat: 8am-12pm

K-Panel Wall Cladding

CoverThickness(mm)Minimum PitchFinishMinimum Length
864mm

 .35

.42

Walls Only

Zincalume

Colorbond®

300mm

Features

864mm – to maximise efficiency and reduce costs.

Easy Fixing – conventional through fixed screws maximise performance and installation.

Low Rib Height – for smart neat appearance used effectively in minimal dust zones.

Fast Erection – a quick covering profile with simple fastening.

Installation

??????

Fastners

All fasteners should conform with AS3566 – Class 3 and be compatible with the cladding material used.

For steel
No. 10 x 16mm hex head self-drilling, self-tapping screws.

For timber
No. 12 x 25mm hex head self-drilling type 17 screws. Add 10mm to screw length for softwood applications.

Side laps
No. 8 x 12mm ‘S’ point screws or 3.2mm diameter sealed aluminium pop rivets.

 

Fastener Positions

Fix adjacent to the overlap and each subsequent rib (4 fasteners per sheet) at every support. Spans over 900mm require the sidelaps to be stitched at mid-span.
For further installation information, please refer to page 9 of the Stramit®Wall Sheeting & Cladding Product Technical Manual.