347-349 Brisbane St, West Ipswich
Mon-Fri: 7.30am-5:00pm Sat: 8am-12pm

Mini-Corry Wall Cladding

Cover Thickness(mm) Minimum Pitch Finish Minimum Length


Walls, awning, ceilings, soffits.

(Not Suitable for roofing)




825mm Cover – for maximum use of material whenever applications permit

Easy Fixing – conventional through fixed screws maximise performance and installation

Roll formed to deliver consistent profile and lengths made to order

Versatility – suitable for a variety of applications in both architectural and industrial markets

Hi-tensile Steel – for greater damage resistance and performance


All fasteners should conform with AS3566 – Class 3 and be compatible with the cladding material used

For Steel

No. 12 x 20mm hex head self-drilling, self-tapping screws. In internal applications, 3.2mm aluminium pop rivets.

For Timber 

No.12 x 25mm hex head self-drilling type 17 screws. Add 10mm to screw length for softwood applications.

Side Laps

No.8 x 12mm ‘S’ point screws, or 3.2mm diameter sealed aluminium pop rivets

Fastener Postions 

For external applications, side lap fasteners are required at 200-300mm centres. At all supports, 4 equally spaced fasteners are required across the sheet including one fastener through or adjacent to the overlap. For internal applications Stramit Minirib® panelling with spaces of 1000mm or more requires the side lap to be stitched at mid-span.

For further installation information, refer to page 11 of the Stramit®Wall Sheeting & Cladding Product Technical Manual.

The Haggarty family and their wonderful team of staff believe in maintaining tradition by offering the community excellent friendly service and growing with the ever increasing needs of their customers.

347-349 Brisbane St, West Ipswich
Phone: (07) 3281 8144

Trading Hours
Mon-Fri: 7.30am -5:00pm
Sat: 8am-12pm

© 2020 The Haggarty Group Qld Pty Ltd Incorporating AUSSIE PAINT BARN & HAGGARTY ROOFING | ABN: 62 142 220 184 | Website by 61 Design